Rain Barrel, Compost Bin, and Rain Chain
 Category
  » Compost Bins
  » Rain Barrels
     - Rain Barrel Accessories
     - Rain Barrel Kits
  » Rain Chains
  » Hose Pots
  » Planters
  » Accessories
New Releases
Compost Wizard Standing Bin
GI-EZCB Compost Wizard Standing Bin
Worm Factory® 360 w/Accessory Kit
CM-WF360B Worm Factory® 360 w/Accessory Kit
Sonoma Hose Pot
GD-448B Sonoma Hose Pot
 Mailing List
Subscribe to our Newsletter
Subscribe
Unsubscribe


Home > Barrels & Bins Setup Guides
 
 
Rain Wizard 50: Connector Kit Assembly Guide
 7/1/2009  by  Barrels & Bins
Rain Wizard 50: Connector Kit Assembly Guide

Tools required (not included in the kit):
-Drill with 1/2” drill bit* (Any bit between ¼”and ½” should work. Just be sure to leave 3/8” thickness to node walls)
-Flat head screwdriver
1) Position your Rain Wizards in the desired
location and position		 4) Slide metal clamps onto tube and connect other
end to drilled node on other barrel
2) Locate the connector nodes on the backs of the
barrels. Using a 3/16” drill bit, drill out holes in the
nodes using the pilot hole as a guide. Only drill the
nodes you plan to use!		 5) Slide clamps towards end of hose and strongly
tighten using flat head screw driver
3) Insert the pipe onto one of the drilled nodes Reposition the barrels and you’re done!
 
 
Barrels & Bins - Div. of Stryker Industries
Copyright Barrels & Bins. All Rights Reserved. eCommerce software powered by 3DCart.